Products
Electroplating wastewater for pharmaceutical 4
The heavy metal scavenger of Cu-2, Zn2 +, Cr3 +, Pb2 +, Cd2 + and other heavy metal ions in the strong negative electric field chelating wastewater generated by the polar group in the molecule of the molecule can produce insoluble flocculent precipitates. (Such as: EDTA, NH3, citric acid, etc.) can also play a full role, and has the advantages of high settling speed, high efficiency, energy saving, environmental protection, recycling, convenient and cheap, and solve the problem of heavy metal coexisting salt and complex salt At present, heavy metal capture agent has a one-time consumption of reagents, can not be recycled, toxic, slow settling, resulting in large volume of sludge, high water content, late filtration and other shortcomings.
Description
GT-HM01 Heavy metal capture agent

The heavy metal scavenger of Cu-2, Zn2 +, Cr3 +, Pb2 +, Cd2 + and other heavy metal ions in the strong negative electric field chelating wastewater generated by the polar group in the molecule of the molecule can produce insoluble flocculent precipitates. (Such as: EDTA, NH3, citric acid, etc.) can also play a full role, and has the advantages of high settling speed, high efficiency, energy saving, environmental protection, recycling, convenient and cheap, and solve the problem of heavy metal coexisting salt and complex salt At present, heavy metal capture agent has a one-time consumption of reagents, can not be recycled, toxic, slow settling, resulting in large volume of sludge, high water content, late filtration and other shortcomings.


Widely used in electroplating industry, mining processing, fertilizer industry, leather manufacturing, battery, paper manufacturing industry and pesticide production and other waste metal removal of heavy metals, especially for acid plating wastewater.


Effective content:≧90%
Traits:Light gray or white crystalline solid
Model:GT-HM01
pH:8.0—11(10%Aqueous solution)
Proportion:1.02—1.12


1. Dosing: Dosage of about 0.05-1 / 1000 of wastewater. The specific dosage depends on the heavy metal concentration in the field wastewater.
2. Preparation: can be prepared into a 5% -20% of the solution, add water should be even after mixing, pay attention to the use of water without heavy metal diluted.
3. Conditions of use: PH value of the application of wastewater for the 4-12, the use of alkaline conditions better;


1. Please use this product after dilution, please use tap water or other non-heavy metal ions, do not use groundwater.
2. After dilution, the medicament is recommended to be added after neutralization to save the product and reduce the handling cost. In the chelating precipitation process can be added after the inorganic or organic flocculant to improve the treatment effect.


Safe:①This product should be kept in direct contact with eyes and skin. Once the contact, immediately rinse with plenty of water, can not be delayed. Manual operation should wear protective glasses and anti-acid gloves.
            ②The company is only responsible for the quality of this product, due to other factors caused by improper results, are not responsible.
Package:25 kg / barrel or according to customer requirements.
Stockpile:Please place dry and cool place, shelf life of one year.







 
Recommend
GT-M01 coking wastewater separation agent
GT-M1 series is the company's independent research and
GT-M02 coking wastewater separation agent
GT-M2 series is the company's independent research and
GT-M03 coking wastewater separation agent
GT-M03 series is the company's independent research and
GT-M04 Coking wastewater decolorizer
GT-M04 is a patented product developed by our company.
GT-M05 coking wastewater separation agent
GT-M05 is the company's introduction of foreign advance
GT-M06coking wastewater separation agent
GT-M06 series is the company's independent research and
GT-M07coking wastewater separation agent
GT-M07 series is the company's independent research and
Emulsion special agent 1 (patented product)
GT-D01 demulsifier for emulsion demulsifier, is the com
Emulsion special agent 2 (patented product)
Emulsion special agent 2 is an inorganic polymer graft